Transport Ventilator KTV-A100 is a high-end portable transport ventilation system equipped with mobile stand, oxygen cylinder and inbuilt clamps to be fastened for secured and easy transportation. Extensive ventilation assistance with real-time trends, lung mechanics ensures high-end performance to achieve best delivered care.
| Tidal Volume |
0 ml – 1500 ml |
| Gas Supply |
O2, 0.28 to 0.6 MPa |
| Ventilation Modes |
A/C, SIMV, SPONT, Manual, VCV+SIGH |
| Respiratory Rate |
4 bpm – 40 bpm (SIMV) 4 bpm – 99 bpm (A/C) |
| Range Of I:E Ratio |
2:1 to 1: 4 |
| FiO2 Range |
48% to 100% |
| Pressure Sensitivity |
Above PEEP: - 2 kPa to 0 kPa PEEP: 0.5 kPa to 2 kPa |
| Pressure Parameter |
Ppeak |
| Volume/Flow Parameter |
Vt , MV |
| Time Parameter |
Ftotal |
| Real-Time Curves |
Pressure-Time |
| Compliance |
< 4 ml/100 Pa |
| Cylinder Capacity |
3.2 L |
| Max. Pressure |
< 6 kPa |
| Battery Life |
4 Hours of Uninterrupted Battery life |
| Environmental Temperature |
Operation: -10°C to 50°C Storage: -20°C to 55°C |
| Relative Humidity |
Operation: < 85 % Storage: < 93 % |
| Atmospheric Pressure |
Operation: 70 kPa – 110 kPa Storage: 50 kPa – 110 kPa |
| Power Supply |
110 V - 220 V, 50/60Hz , < 65 VA |
| Dimensions |
175 x 170 x 300 mm |
| Weight |
3.5 Kgs |
Features
Applications
Used in ambulances or outdoor patient transfer, ideal for acute-care airway ventilation for inter-hospital, intra-hospital, or prehospital emergency transport etc.
| Tidal Volume |
0 ml – 1500 ml |
| Gas Supply |
O2, 0.28 to 0.6 MPa |
| Ventilation Modes |
A/C, SIMV, SPONT, Manual, VCV+SIGH |
| Tidal Volume |
0 ml – 1500 ml |
| Gas Supply |
O2, 0.28 to 0.6 MPa |
| Ventilation Modes |
A/C, SIMV, SPONT, Manual, VCV+SIGH |
| Tidal Volume |
0 ml – 1500 ml |
| Gas Supply |
O2, 0.28 to 0.6 MPa |
| Ventilation Modes |
A/C, SIMV, SPONT, Manual, VCV+SIGH |
| Control System | Air-temp control |
| Display | LED display |
| Air Temperature Control range | 25°C ~ 37°C |
| Control System | Air-temp control, Skin-temp control & Humidity control |
| Display | LED display |
| Air Temperature Control range | 25°C ~ 37°C (Override : 37°C ~ 39°C) |
| Control System | Air-temp control & Skin-temp control |
| Display | LED display |
| Air Temperature Control range | 25°C ~ 37°C (Override : 37°C ~ 39°C) |
| Control System | Microprocessor based temperature control system |
| Control Modes | Preheat, Manual and Skin-temp mode |
| Manual : Heater output | 0-100%, 10% increments |
| Light Source | 8 Blue LED lights |
| Wavelength | 450 to 475nm |
| LED Lamp-life | 1,00,000 hours |
| Display | 7-inch screen |
| Waveform | Biphasic |
| Manual with Sync mode | 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules |
| Waveform | Biphasic |
| Energy Sequence | 150 J, 200 J |
| Analysis Time | 9 seconds |
| Channel | Single channel infusion |
| Volume (VTBI) | 1 ml ~ 9999.9 ml ( 0.1 ml increment) |
| Accuracy | Flow rate: ≤ ± 3 % Mechanical: ≤ ± 2 % |
| Channel | Single channel infusion |
| Infusion Volume | 0 ml ~ 9999 ml ( 0.1ml increment) |
| Infusion Rate | 0.01 ml/h ~ 1200 ml/h (0.01ml/h increment) |
