Intensive Care Ventilator KVI- A102 is designed to meet the needs of clinical respiratory management for Infants with respiratory disorder. It has a provision to work with innovative ventilation modes like constant flow, pressure limit and time cycle ventilation.
| Tidal Volume |
10 ml ~ 300 ml |
| Standard Ventilation Mode |
CMV, IMV, CPAP, Manual |
| Application |
Pediatric |
| Inspiratory Flow |
3 L/min ~ 20 L/min |
| Respiration rate |
1 bpm ~120 bpm |
| I:E Ratio |
1:1 to 1:3 |
| Oxygen Concentration |
21 % ~ 100 % |
| Pressure trigger Range |
-1.0 to 0 kPa |
| Flow Trigger Range |
0 to 10 L |
| PEEP Type |
Pneumatic Driven, Electronic Control |
| Inspiratory Pause Time |
0.2 s ~ 3.0 s |
| Maximum Security Pressure |
≤ 10 kPa |
| PEEP Range |
0 kPa ~2.0 kPa |
| Max Ventilation Volume |
> 5 L/min |
| Input Pressure |
0.15 MPa ~ 0.3 Mpa |
| Inspiratory Pressure |
1 kPa ~ 9 kPa |
Features
Applications
Used in operating rooms, NICU, and other departments for pulmonary life-support during acute lung injury or respiratory distress which result in inadequate oxygenation or ventilation inability to protect the airway fluids.
| Tidal Volume |
10 ml ~ 300 ml |
| Standard Ventilation Mode |
CMV, IMV, CPAP, Manual |
| Application |
Pediatric |
| Tidal Volume |
10 ml ~ 300 ml |
| Standard Ventilation Mode |
CMV, IMV, CPAP, Manual |
| Application |
Pediatric |
| Tidal Volume |
10 ml ~ 300 ml |
| Standard Ventilation Mode |
CMV, IMV, CPAP, Manual |
| Application |
Pediatric |
| Control System | Air-temp control & Skin-temp control |
| Display | LED display |
| Air Temperature Control range | 25°C ~ 37°C (Override : 37°C ~ 39°C) |
| Control System | Air-temp control |
| Display | LED display |
| Air Temperature Control range | 25°C ~ 37°C |
| Control System | Air-temp control, Skin-temp control & Humidity control |
| Display | LED display |
| Air Temperature Control range | 25°C ~ 37°C (Override : 37°C ~ 39°C) |
| Control System | Microprocessor based temperature control system |
| Control Modes | Preheat, Manual and Skin-temp mode |
| Manual : Heater output | 0-100%, 10% increments |
| Light Source | 8 Blue LED lights |
| Wavelength | 450 to 475nm |
| LED Lamp-life | 1,00,000 hours |
| Waveform | Biphasic |
| Energy Sequence | 150 J, 200 J |
| Analysis Time | 9 seconds |
| Display | 7-inch screen |
| Waveform | Biphasic |
| Manual with Sync mode | 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules |
| Channel | Single channel infusion |
| Infusion Volume | 0 ml ~ 9999 ml ( 0.1ml increment) |
| Infusion Rate | 0.01 ml/h ~ 1200 ml/h (0.01ml/h increment) |
| Channel | Single channel infusion |
| Volume (VTBI) | 1 ml ~ 9999.9 ml ( 0.1 ml increment) |
| Accuracy | Flow rate: ≤ ± 3 % Mechanical: ≤ ± 2 % |
